Tips From the Moving Company Pros: Ways To Move a Pinball Maker



With pinball making a big resurgence throughout the country, Gentle Giant desires to ensure that these timeless, gorgeous makers stay damage-free while being transferred. Oh, and we desire individuals moving them to be safe, too.

Initially look, pinball devices can appear frightening to move because of their fragility, size, and weight. Thankfully, our proficient Giants have a few tricks up their sleeves to guarantee your pinball is moved with ease.
Folding Down the Headbox

The majority of contemporary pinballs (made in the last Twenty Years or so) have a hinge system which enables the headbox to be folded down. Early pinball makers had their headboxes bolted on, using either two or 4 bolts. All Electro-Mechanical pinballs use this system, together with the early Strong State makers.

Later devices have hinges and utilize a latching system to keep the headbox upright. There may likewise be two bolts inside as added security, in case the lock is broken or accidentally un-latched.
Electro-Mechanical Pinballs

For Electro-Mechanical pinball devices, you require to remove the headbox rear access panel to get to the bolts and plugs within. Typically this panel has a lock on it to keep it in location, however over time the key might have been lost. On a regular basis, there is a screw keeping this panel in location.

As soon as inside, eliminate the bolts and disconnect the big connectors that have electrical wiring decreasing into the maker. You may wish to identify these adapters to put them back in the right spot, however they need to be different sizes, making it challenging to plug back improperly.

You can now get rid of the headbox completely, or fold the headbox down onto the playfield glass. Make sure you use some foam, heavy cardboard, or blankets to secure the headbox from rubbing on the cabinet. Foam is best, as it will assist keep the back glass in place.
Early Solid State Pinballs

For early Strong State Pinballs, you will have to get rid of the back glass. There is a lock located on the headbox in one of three places: the left-hand side at the top, right-hand side at the leading or on top of the headbox in the.

Once unlocked, eliminate the back glass by raising it up utilizing the lift channel (at the bottom of the glass), and then pull it out from the bottom.

Then, open up the back box lamp panel by raising the lock situated on either the left-hand side or right-hand side. The panel can now swing out to you, and give you access to the circuit boards, plugs, and the bolts. Some Gottlieb pinballs require you to lift up the light panel in order to swing it open.

Now that you are within, you can get rid of the bolts, and any plugs that have wires going down into the machine. You may desire to identify these plugs to put them back in the ideal spot. You may not have to eliminate the plugs, as the circuitry needs to be long enough to allow the headbox to be folded down.

At this point, you can secure the light panel and change the back glass.
Modern Strong State Pinballs

For Data East, Sega, and Stern Modern pinballs, there is a turnable latch system located at the back of the headbox. Using the provided secret, turn the lock 90 ° counter-clockwise.

For Williams, Bally, and Gottlieb, you can quickly unlatch the back box at the back of the machine. This is a simple setup and requires no tools.

You're done if you can now fold down the head box onto the cabinet. Make certain you utilize some foam, heavy cardboard, or blankets to protect the headbox from rubbing on the cabinet. Foam is best, as it will also help keep the back glass in place.

You require to get within if you can not fold the head box down. There is a lock located at the top of the back glass in the center. Use the supplied secret to unlock, and get rid of the back glass by raising it up from the bottom, then pulling it out from the bottom.

Next, you will require to eliminate the display screen panel. check my blog (Some more recent Williams and Bally pinballs do not have a different amp panel, it is part of the back glass panel. And later on Sega and Stern pinballs use a fluorescent tube for the back glass lighting).

Remove the two bolts, put the back box back together, and fold down the head box onto the cabinet. Make sure you use some foam, heavy cardboard, or blankets to safeguard the headbox from rubbing on the cabinet. Foam is best, as it will also assist keep the back glass in location.
Eliminating the Legs.

Pinball Machine legs are held in place by eight bolts. The modern pinballs have captive nuts or threaded plates inside for the bolts to screw into.

But these captive nuts and threaded plates can be damaged, and making use of extra nuts may have been required. If this holds true, you will require to open the front door of the pinball, slide out the this page playfield glass, and raise up the playfield.

With the front door (coin door) open, move the lock down bar lock throughout and get my company rid of the lock down bar. Move out the playfield glass, and put in a safe location. Next, raise the playfield by positioning your hand where the ball drains pipes, and raise the playfield up.

You need to now have access to any nuts that may have been used. Once any nuts have been removed, replace the playfield glass and lock down bar, and lock the front door.

Be sure to mark or remember which legs are for the front and back, as they will be adjusted differently to suit.
Loading the Pinball.

You are now ready to transport your pinball machine. Before you load it, make sure you remove the pinballs so they don't bounce around during transport.

If you are moving the pinball using a van or SUV, it may be easier to remove the legs simply prior to filling the maker. Get a pal to assist and have one of you supporting the pinball, while the other eliminates the front legs. Slide the machine in, and then remove the back legs. It is much simpler to fill the maker front.

Make certain you strap the pinball in, as you do not desire it moving if you need to stop unexpectedly!

For Electro-Mechanical pinball devices, you require to eliminate the headbox rear access panel to gain access to the bolts and plugs inside. (Some newer Williams and Bally pinballs do not have a different amp panel, it is part of the back glass panel. And later on Sega and Stern pinballs utilize a fluorescent tube for the back glass lighting).

If you are moving the pinball utilizing a van or SUV, it might be simpler to remove the legs just prior to loading the machine. Get a good friend to assist and have one of you supporting the pinball, while the other eliminates the front legs.

Leave a Reply

Your email address will not be published. Required fields are marked *